Allied Tube & Conduit 138 atkore.com/flexicon Flexicon Fixing Conduit Fixing Conduit Clips can be secured using the fixing hole in the base of the clip. Ensure the hinged lid is open and insert the conduit from above. The clip size is shown on the clip for easy reference. The clip provides a secure fit whether the hinge is open or closed. The FCL clip includes an internal rib to help locate and retain corrugated conduits. The FCL-P clips do not have this rib and can therefore be used with plain or smooth outer conduits. Once the conduit is located, close the hinge and listen for a click. The clip does not rely on the hinge to retain the conduit in place however the lid increases conduit retention. To remove the conduit insert a small screwdriver where it states OPEN. Push down and lever to release. The hinge should then be free to open. Our F-Clamp solution is ideal for added security and fixing of conduits which could be subject to vibration, stresses or continuous and repeated movement. There are various fixing options depending on the installation. • Fig.1 represents a Weld Plate with an F-Clamp with a Cover Plate. • Fig.2 represents an elongated Weld Plate with an F-Clamp and a Cover Plate. • Fig.3 shows an F-Clamp mounted directly onto Channel Profile B using Channel Nuts. • Fig.4 shows and F-Clamp mounted directly onto Channel Profile B using Channel Nuts with a Cover Plate. Clips can be located by sliding into the end of the channel. To install, slide the FCL clip in from the end of the channel. The FCL clips have been designed to easily fit within the channel. A choice of fixing options are available to securely fasten the FCL clip within or to the channel. Securing Conduit - FCL Clips and F-Clamps Simple Removal Fig.3 Fig.4 Fig.2 Fig.1 Conduit MountingOptions Conduit Clips and Mounting Channel Clip Mounting
RkJQdWJsaXNoZXIy NTk2NDg=