Fixed internal thread nickel plated brass Two part fitting comprising shell and body with internal thread which can be used to couple two pieces of conduit together when used with a swivel fitting. External thread nickel plated brass Multipart compression fitting including elastomeric seal. The external thread swivels about the main body even after tightening. External thread elbow nickel plated brass Multipart 90˚ compression fitting including elastomeric seal. Nickel plated brass Multipart compression coupler to connect two conduits together. Insert nickel plated brass Single part, machined insert to cap end of conduit. External thread nickel plated brass Multipart compression fitting including elastomeric seal. Can be used for knockouts or threaded entries as fitting rotates until tightened. F C-S C90 Coupler E C IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 metric thread part number metric thread part number metric thread part number part number part number nominal size (mm) metric thread part number PG thread part number NPT thread part number FSU12-M16-C FSU12-PG9-C FSU12-M16-C-S FSU12-M16-C90 FSU12-E 12 FSU16-M16-F FSU16-M16-C FSU16-PG11-C FSU16-050-C FSU16-M16-C-S FSU16-M16-C90 FSU16-FSU16 FSU16-E 16 FSU16-M20-F FSU16-M20-C FSU16-PG13-C FSU16-M20-C-S FSU16-M20-C90 FSU16-E 16 FSU20-M20-F FSU20-M20-C FSU20-PG16-C FSU20-050-C FSU20-M20-C-S FSU20-M20-C90 FSU20-FSU20 FSU20-E 20 FSU25-M25-F FSU25-M25-C FSU25-PG21-C FSU25-075-C FSU25-M25-C-S FSU25-M25-C90 FSU25-FSU25 FSU25-E 25 FSU32-M32-F FSU32-M32-C FSU32-PG29-C FSU32-100-C FSU32-M32-C-S FSU32-M32-C90 FSU32-FSU32 FSU32-E 32 FSU40-M40-F FSU40-M40-C FSU40-E 40 FSU50-M50-F FSU50-M50-C FSU50-E 50 FSU63-M63-F FSU63-E 63 FSU75-E 75 Standards Technical Drawing Note: refer to conduit properties for applicable standards BS EN IEC 61386 REACh Allied Tube & Conduit 93 atkore.com/flexicon Flexicon • High mechanical strength • Highly flexible • IP rating: IP54 with standard fittings, IP65 with type C compression fittings • Extra low Fire Hazard • UL94 V0, for LFH see page 148 (LFHU) • High fatigue life and high abrasion resistant (FPU) • Halogen, sulphur and phosphorus free • Compliant to LUL Std S1085 (LFHU) (Cert No. 297) • EN45545-2 HL3 for LFHU • Temperature range: -25˚C to +90˚C (LFHU) -40˚C to +100˚C (FPU) • Nickel plated brass fittings • Vibration and shock tested to EN61373 Cat 2 • Thread face sealing washers may be required to maintain IP rating at the connection to other equipment, see page 124 Properties
RkJQdWJsaXNoZXIy NTk2NDg=