Allied Tube & Conduit 91 atkore.com/flexicon Flexicon Fixed internal thread nickel plated brass Two part fitting comprising shell and body with internal thread which can be used to couple two pieces of conduit together when used with a swivel fitting. External thread nickel plated brass Multipart compression fitting including elastomeric seal. The external thread swivels about the main body even after tightening. External thread elbow nickel plated brass Multipart 90˚ compression fitting including elastomeric seal. Nickel plated brass Multipart compression coupler to connect two conduits together. Insert nickel plated brass Single part, machined insert to cap end of conduit. External thread nickel plated brass Multipart compression fitting including elastomeric seal. Can be used for knockouts or threaded entries as fitting rotates until tightened. F C-S C90 Coupler E C IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 metric thread part number metric thread part number metric thread part number part number part number nominal size (mm) metric thread part number PG thread part number NPT thread part number FSU10-E 10 FSU12-M16-C FSU12-PG9-C FSU12-M16-C-S FSU12-M16-C90 FSU12-E 12 FSU16-M16-F FSU16-M16-C FSU16-PG11-C FSU16-050-C FSU16-M16-C-S FSU16-M16-C90 FSU16-FSU16 FSU16-E 16 FSU16-M20-F FSU16-M20-C FSU16-PG13-C FSU16-M20-C-S FSU16-M20-C90 FSU16-E 16 FSU20-M20-F FSU20-M20-C FSU20-PG16-C FSU20-050-C FSU20-M20-C-S FSU20-M20-C90 FSU20-FSU20 FSU20-E 20 FSU25-M25-F FSU25-M25-C FSU25-PG21-C FSU25-075-C FSU25-M25-C-S FSU25-M25-C90 FSU25-FSU25 FSU25-E 25 FSU32-M32-F FSU32-M32-C FSU32-PG29-C FSU32-100-C FSU32-M32-C-S FSU32-M32-C90 FSU32-FSU32 FSU32-E 32 FSU40-M40-F FSU40-M40-C FSU40-E 40 FSU50-M50-F FSU50-M50-C FSU50-E 50 FSU63-M63-F FSU63-E 63 FSU75-E 75 BS EN IEC 61386 REACh Also available in a Contractor Pack - see page 128 Standards Technical Drawing • High mechanical strength • Highly flexible • IP rating: IP54 with standard fittings, IP65 with type C compression fittings • Temperature range -15˚C to +70˚C (FSU) -40˚C to +120˚C (FNU) • FNU offers high abrasion resistance and solvent resistance • Low Fire Hazard version available (see type LFHU on page 92) • Nickel plated brass fittings • Vibration and shock tested to EN 61373 Cat 2 • Thread face sealing washers may be required to maintain IP rating at the connection to other equipment, see page 124 Properties
RkJQdWJsaXNoZXIy NTk2NDg=