Allied Tube & Conduit 55 atkore.com/flexicon Flexicon NPB Metric NPB Metric NPB Metric nominal size (mm) OD mm european (NW) sizes 10 10.0 7 10 7 11 11.5 8 FPA13-BM16-CG FPA13-BM16-CG-90 13 13.0 10 13 10 13 10 FPA16-BM16-CG FPA16-BM16-CG-90 FPA16-BM20-CG-45 16 15.8 12 FPA16-BM20-CG FPA16-BM20-CG-90 16 12 16 12 16 12 18 18.5 14 18 14 20 20.0 FPA21-BM20-CG FPA21-BM20-CG-90 FPA21-BM20-CG-45 21 21.2 17 21 17 21 17 25 25.0 FPA28-BM25-CG FPA28-BM25-CG-90 FPA28-BM25-CG-45 28 28.5 23 28 23 FPA34-BM32-CG FPA34-BM32-CG-90 FPA34-BM32-CG-45 34 34.5 29 34 29 FPA42-BM40-CG FPA42-BM40-CG-90 FPA42-BM40-CG-45 42 42.5 36 42 36 FPA54-BM50-CG FPA54-BM50-CG-90 FPA54-BM50-CG-45 54 54.5 48 54 48 67 67.0 56 80 70 106 95 With integral cable gland One piece, fast fit, swivel, nickel plated brass external threaded cable gland fitting. Suitable for knockouts or threaded entries. With integral cable gland One piece, fast fit, swivel, 90 degree elbow, nickel plated brass external threaded cable gland fitting. Suitable for knockouts or threaded entries. With integral cable gland One piece, fast fit, swivel, 45 degree elbow, nickel plated brass external threaded cable gland fitting. Suitable for knockouts or threaded entries. FPA FPA90 FPA45 IP68 IP67 IP66 IP65 IP54 0 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 Note: PG thread versions and EMC Cable Gland version on request. • 1 part fast fit • IP rating: of conduit & fitting: IP66 of cable gland: IP68 (10 bar)+IP69 • Vibration & shock tested to EN61373 Cat 2 • Tamper resistant • Can be removed using a screwdriver • All round teeth give high pull off strength 70kg with FPAH21 • Both 90˚ and 45˚ elbows incorporate swept bore to facilitate cable installation and protect cables when installed • Suitable for fine and coarse pitch conduits • Temperature range: conduit fitting: -50˚C to +135˚C cable gland: -40˚C to +100˚C static -20˚C to +100˚C dynamic • Low Fire Hazard (LFH), see page 144 • Halogen, sulphur and phosphorus free • Refer to accessories for clamping range page 129 • Thread face sealing washers may be required to maintain IP rating at the connection to other equipment, see page 124 Properties Standards BS EN IEC61386 REACh
RkJQdWJsaXNoZXIy NTk2NDg=