Allied Tube & Conduit 53 atkore.com/flexicon Flexicon NPB Int Metric NPB Ext Metric NPB Ext PG nominal size (mm) OD mm european (NW) sizes NPB Ext Metric NPB Ext PG 10 10.0 7 10 7 11 11.5 8 FPA13-BM16 FPA13-BPG9 FPA13-BFM16 FPA13-BM16-90 FPA13-BPG9-90 13 13.0 10 13 10 13 10 FPA16-BM16 FPA16-BPG9 FPA16-BFM16 FPA16-BM16-90 FPA16-BPG9-90 16 15.8 12 FPA16-BM20 FPA16-BPG11 FPA16-BFM20 FPA16-BM20-90 FPA16-BPG11-90 16 12 16 12 16 12 18 18.5 14 18 14 20 20.0 FPA21-BM20 FPA21-BPG13 FPA21-BFM20 FPA21-BM20-90 FPA21-BPG13-90 21 21.2 17 FPA21-BPG16 FPA21-BPG16-90 21 17 21 17 25 25.0 FPA28-BM25 FPA28-BPG21 FPA28-BFM25 FPA28-BM25-90 FPA28-BPG21-90 28 28.5 23 28 23 FPA34-BM32 FPA34-BPG29 FPA34-BFM32 FPA34-BM32-90 FPA34-BPG29-90 34 34.5 29 34 29 FPA42-BM40 FPA42-BPG36 FPA42-BFM40 FPA42-BM40-90 FPA42-BPG36-90 42 42.5 36 FPA42-BM50 FPA42-BM50-90 42 36 FPA54-BM50 FPA54-BPG48* FPA54-BFM50 FPA54-BM50-90 FPA54-BPG48-90* 54 54.5 48 FPA54-BM63 FPA54-BM63-90 54 48 FPA67-BM63 67 67.0 56 80 70 106 95 Straight swivel brass external thread One piece, fast fit, swivel, nickel plated brass external threaded fitting. Suitable for knockouts or threaded entries. Straight swivel brass internal thread One piece, fast fit, swivel, nickel plated brass internal threaded fitting. 90° Elbow swivel brass external thread One piece, fast fit, swivel, 90 degree elbow, nickel plated brass external threaded fitting. Suitable for knockouts or threaded entries. FPA FPA FPA90 IP68 IP67 IP66 IP65 IP54 0 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 • 1 part fast fit • IP rating: IP66 • Vibration & shock tested to EN61373 Cat 2 • Tamper resistant • Can be removed using a screwdriver • Both 90˚ & 45˚ elbows incorporate swept bore to facilitate cable installation & protect cables when installed • All round teeth give high pull off strength 70kg with FPAH21 • Suitable for fine and coarse pitch conduits • Temperature range -50˚C to +135˚C • Low Fire Hazard (LFH), see page 144 • Halogen, sulphur and phosphorus free • Available in Black or Grey (RAL 7031) • EN 45545 HL3 and NFPA 130 compliant • Thread face sealing washers may be required to maintain IP rating at the connection to other equipment, see page 124 Properties BS EN IEC61386 REACh Standards
RkJQdWJsaXNoZXIy NTk2NDg=