Allied Tube & Conduit 141 atkore.com/flexicon Scanme Scanme Watch the Connectabox™ animation now! Accessory fitting guide for user drilled holes Flexicon Non-Metallic Conduit Installation Flexicon Watch the Connectabox™ animationnow! Scananduseour FlexiApp now! For instructions on how to install, upgrade and to experience all of the benefits of Connectabox™ please watch the Connectabox animation using the QR code for a direct link. Examples of configurations: DIN Rail Insert Plate & DIN 4 way with Splicing Connector 3 Way using Blanking Plug (different size conduits) Multi Way using Flexible Conduit & Cable Glands When using genuine Flexicon accessories in a correctly sized hole with a sealing washer and nut correctly torqued up, the IP of the assembled unit will bemaintained to the rating stated for the accessory. Warning Use of third party accessories may affect the IP rating of the assembled unit. The Flexicon Connectabox™ Fittings are compatible with 16 Flexicon Non-Metallic flexible corrugated conduits. IP ratings quoted within this brochure are based on using Flexicon Conduit. Flexicon cannot guaranteed IP ratings if other brands of conduit are used. For help choosing themost suitable conduit for your application, check out the FlexiApp. Accessory fitting guide 1. Align slot in conduit fitting and index mark on box. Lubricate O-ring before installation. 2. Push fitting fully home into box and rotate until it clicks. Fitting is now fully assembled. 3. To remove fitting, push down on tab, rotate fitting to release and withdraw. Note-fittings cannot be removed whilst box lid is in place
RkJQdWJsaXNoZXIy NTk2NDg=