Allied Tube & Conduit 119 atkore.com/flexicon Flexicon External thread elbow nickel plated brass Multipart 90˚ compression fitting including conduit retention clip and elastomeric seal. Can be used with knockouts. Braid is locked between inner and outer compression nuts. C-90 Fibre retained face sealing washers Retained sealing washer to maintain IP rating of fitting to adjacent equipment. Galvanised steel and nickel plated brass locknuts Hexagonal locknut to secure fitting. EMC locknuts have raised corners to ensure good continuity. Fibre face sealing washers Sealing washer to maintain IP rating of fitting to adjacent equipment. FW Locknuts Sealing Washers Internal and external threaded nickel plated brass elbow 90˚ elbow which can be screwed onto external threaded fittings. 90° Elbow Plated steel P clip with pvc liner, stainless steel P clips P clip to support conduit. FCC IP68 IP67 IP66 IP65 4 IP69 metric thread part number metric thread part number metric thread part number part number plated steel part number stainless steel part number nominal size (mm) metric thread steel part number metric thread EMC part number metric thread brass part number BM90-16M FW16 FWPG11 S-M16 B-M16 FCC16 FCC16-SS 16 BC21-M20-C90 BM90-20M FW20 FWPG16 S-M20 B-M20-EMC B-M20 FCC20 FCC20-SS 20 BM90-25M FW25 FWPG21 S-M25 B-M25-EMC B-M25 FCC25 FCC25-SS 25 BM90-32M FW32 FWPG29 S-M32 B-M32-EMC B-M32 FCC32 FCC32-SS 32 BM90-40M FW40 S-M40 B-M40-EMC B-M40 FCC40 FCC40-SS 40 BM90-50M FW50 S-M50 B-M50 FCC50 FCC50-SS 50 FPRTC FPRSS, FPISS, FPIHRLSS, FPIHSS Technical Drawing EMC Screening Performance FPRSS & FPRTC • Highly flexible and high fatigue life • High impact strength • Temperature range -40˚C to +120˚C • Extra low fire hazard see page 144 • Provides EMC screening 49dB@1MHz (FPRSS) 67dB@1MHz (FPRTC) • FPRSSprovides high tensile strength and resistance to abrasion, corrosion and vandals • Vibration and shock tested to EN61373 Cat 2 • LUL Std S1085 Cert No. 298 • FPRSS&FPRTCEN45545-2 toHL3R22 andR23 FPISS, FPIHSS & FPIHRLSS • Highly flexible • Exceptional fatigue life • Very high impact resistance even at low temperatures • Temperature range -50˚C to +110˚C • Low fire hazard • Provides EMC screening 49dB@1MHz • Provides high tensile strength and resistance to abrasion, corrosion and vandals • Vibration and shock tested to EN61373 Cat 2 • FPIHRLSS EN 45545-2 to HL3 R23 Exterior Properties
RkJQdWJsaXNoZXIy NTk2NDg=