Allied Tube & Conduit 115 atkore.com/flexicon Flexicon hole size (mm) part number metric thread part number PG thread part number metric thread part number metric thread part number nominal size (mm) 12 FSB12-P 12 16 FSB16-P FSB16-M16-C FSB16-PG11-C FSB16-M16-C-S FSB16-M16-C90 16 FSB16-M20-C FSB16-PG13-C FSB16-M20-C-S FSB16-M20-C90 16 20 FSB20-P FSB20-M20-C FSB20-PG16-C FSB20-M20-C-S FSB20-M20-C90 20 25 FSB25-P FSB25-M25-C FSB25-PG21-C FSB25-M25-C-S FSB25-M25-C90 25 32 FSB32-P FSB32-M32-C FSB32-PG29-C FSB32-M32-C-S FSB32-M32-C90 32 40 FSB40-P 40 50 FSB50-P 50 Plain hole connector nickel plated brass Two part fitting comprising shell and body without thread. The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush. P Swivel external thread nickel plated brass Multipart compression fitting including elastomeric seal can be used for knockouts or threaded entries. Braid is locked between inner and outer compression nuts. CS External thread elbow nickel plated brass Multipart 90˚ compression fitting including elastomeric seal. Braid is locked between inner and outer compression nuts. C90 Fixed external thread nickel plated brass Multipart compression fitting including elastomeric seal. Can be used for knockouts. Braid is locked between inner and outer compression nuts. C IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 68 I 67 IP66 IP65 IP54 IP40 9 FSB LFHUBRD Technical Drawing EMC Screening Performance • High mechanical strength • Tensile strength with standard fittings 120kg for 20mm size • Tensile strength with C type fittings 300kg for 20mm size • Highly flexible • IP rating: IP54 for standard fittings, IP65 for C type fittings • High abrasion resistance • Resists hot metal swarf and splashes • Provides EMC screening • Temperature range -15˚C to +70˚C (FSB) -20˚C to +90˚C (LFHUBRD) • LFHUBRD is extra low fire hazard • Compliant to LUL Std S1085 (LFHUBRD) (Cert No. 297) • Nickel plated brass fittings • Vibration and shock tested to EN61373 Cat 2 • LFHUBRD is EN45545-2 to HL3 • Thread face sealing washers may be required to maintain IP rating at the connection to other equipment, see page 124 Properties
RkJQdWJsaXNoZXIy NTk2NDg=