Allied Tube & Conduit 110 atkore.com/flexicon Flexicon STANDARD LOW FIRE HAZARD EXTRA LOW FIRE HAZARD INHERENT LOW FIRE HAZARD STANDARD EMC SCREEN ENHANCED EMC SCREEN SUPER EMC SCREEN STANDARD EMC SCREEN ENHANCED EMC SCREEN SUPER EMC SCREEN Conduit Construction: Corrugated galvanised steel with kraft paper lining and smooth pvc outer cover. Colour: Black Typical Applications: Any installation where there is no movement and a high IP rating is required. • High compression strength • Pull off strength: Type C 50kg (20mm) • Provides EMC screening • IP rating: IP66 + IP67 for Type C • Smooth, wipe clean outer cover • Does not wrinkle when bent • Can be formed into shape requiring fewer clips • Temperature range -15˚C to +70˚C • Lloyd’s Register Type Approved FLP Fittings External thread nickel plated brass Multipart compression fitting including serrated elastomeric seal. Can be used for knockout or threaded entries as fitting rotates until tightened. Provides EMC screening once outer plastic sheath is trimmed from end of conduit. C Type IP68 IP67 IP66 IP65 IP54 IP40 IP69 IP68 IP67 IP66 IP65 IP54 IP40 IP69 I I IP I I I I P I IP66 IP65 IP54 IP40 Conduit Construction: Corrugated galvanised steel with kraft paper lining. Colour: Zinc self colour. Typical Applications: Any installation where there is no movement. • High compression strength • Provides EMC screening • IP rating: IP40 • Can be formed into shape requiring fewer clips • Temperature range -40˚C to +120˚C • Nickel plated brass fittings • Inherently low fire hazard FL Fittings External thread nickel plated brass Multipart compression fitting including elastomeric compression seal. Can be used for knockout or threaded entries as fitting rotates until tightened. Provides EMC screening. C Type IP68 IP67 IP66 IP65 IP54 IP40 IP69 nominal size (mm) FL part number reel length (m) reel length (m) outside dia (mm) inside dia (mm) metric thread part number FLP part number reel length (m) min inside bend radius (mm) outside dia (mm) inside dia (mm) metric thread part number 16 20 FL20 25 19.0 14.6 35 FL20-M20-C FLP20B 10,25,50 35 20.9 14.6 FLP20-M20-C 25 FL25 25 25.1 20.4 45 FL25-M25-C FLP25B 10,25,50 45 27.3 20.4 FLP25-M25-C 32 FLP32B 10,25 55 34.0 26.7 FLP32-M32-C 40 50 Technical Drawing BS EN IEC 61386 Note: refer to conduit properties for applicable standards FLP with C type REACh FL system FLP system Galvanised steel pliable Galvanised steel PVC coated, pliable Standards
RkJQdWJsaXNoZXIy NTk2NDg=